1. 讀課本,不要讀參考書
千萬不要只依賴參考書、講義或是老師上課重點,“讀”參考書、講義、老師給的重點是較無意義的學習,講義是用來補充自己不足,不是用來學習內容概念的,補不足的方式是:
/*
* PHYduino紅外線溫度計+溫濕度計
* need 需要元件 DHT11溫濕度計、MLX90614紅外線溫度計、OLED0.96吋
* design by orangeV,taiwan,tainan 台南大成國中 蔡智恆
* need libraries 需要程式庫<DHT.h>,<SPI.h>,<Wire.h>,<Adafruit_GFX.h>,<Adafruit_SSD1306.h>,<Adafruit_MLX90614.h>
*/
int
//對應腳位
ds18b20 = 7,
DHTPin = 15, //A1溫濕度DHT
DHT2Pin = 16; //A2溫濕度DHT2
//DHT11/22
#include <DHT.h>
DHT dht(DHTPin, DHT11);
DHT dht2(DHT2Pin, DHT11);
#include <OneWire.h>
#include <DallasTemperature.h>
OneWire oneWire(ds18b20);
DallasTemperature sensors(&oneWire);
//MLX90614
#include <Wire.h>
#include <Adafruit_MLX90614.h>
Adafruit_MLX90614 mlx = Adafruit_MLX90614();
//OLED
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#define OLED_RESET -1
Adafruit_SSD1306 display(OLED_RESET);
//OLEDsetting
#define LOGO16_GLCD_HEIGHT 32
#define LOGO16_GLCD_WIDTH 16
#if (SSD1306_LCDHEIGHT != 32)
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif
int line_count=0;
const unsigned char PHYduino_Logo [] PROGMEM = {
0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe,
0x5f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfa,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e,
0x67, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe6,
0x65, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa6,
0x66, 0xff, 0xfc, 0xff, 0xfc, 0xe0, 0x38, 0x00, 0x18, 0x00, 0x00, 0x00, 0x03, 0x80, 0x00, 0x66,
0x66, 0x00, 0x14, 0xa0, 0x14, 0xa0, 0x68, 0x00, 0x18, 0x00, 0x00, 0x00, 0x02, 0x80, 0x00, 0x66,
0x66, 0xfc, 0x0c, 0xc0, 0x0c, 0xc0, 0x98, 0x00, 0x18, 0x00, 0x00, 0x00, 0x03, 0x80, 0x00, 0x66,
0x66, 0x0c, 0x0c, 0xc0, 0x00, 0x83, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0xa6,
0x66, 0x0c, 0x0c, 0xc0, 0x00, 0x8c, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x03, 0x80, 0x00, 0xe6,
0x66, 0x0c, 0x1c, 0xe0, 0x00, 0xd0, 0x18, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x02, 0x80, 0x00, 0x06,
0x66, 0xf7, 0xf4, 0xa0, 0x1c, 0xa0, 0x39, 0xff, 0xf7, 0x80, 0x7f, 0xc3, 0xf3, 0x06, 0x00, 0xe6,
0x66, 0xac, 0x18, 0xff, 0xf4, 0xff, 0xe9, 0x40, 0x1e, 0x80, 0x51, 0x42, 0xd3, 0x05, 0xff, 0xa6,
0x66, 0xcc, 0x00, 0x00, 0x0c, 0x00, 0x39, 0x80, 0x19, 0x80, 0xf1, 0xf3, 0x33, 0x06, 0x00, 0x66,
0x66, 0x0c, 0x00, 0x00, 0x04, 0x00, 0x19, 0x80, 0x19, 0x83, 0x31, 0x98, 0x33, 0x06, 0x00, 0x66,
0x66, 0x0c, 0x00, 0x00, 0x04, 0x00, 0x19, 0x80, 0x19, 0x8c, 0x31, 0x8e, 0x33, 0x06, 0x00, 0x66,
0x66, 0x0e, 0x00, 0x00, 0x0c, 0x00, 0x39, 0xc0, 0x39, 0xb0, 0x31, 0x83, 0xb3, 0x92, 0x00, 0x66,
0x66, 0x0a, 0x00, 0x00, 0x14, 0x00, 0x29, 0x40, 0x29, 0x40, 0x51, 0x40, 0xd2, 0xad, 0xff, 0xa6,
0x67, 0x0f, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xf9, 0xff, 0xf9, 0xc0, 0x73, 0xc6, 0x00, 0xe6,
0x65, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x66,
0x67, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf6,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e,
0x5f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfa,
0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
void setup() {
//DHT
Wire.begin();
dht.begin();
dht2.begin();
//ds18b20
sensors.begin();
Serial.begin(9600);
mlx.begin();
//OLED
display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
display.display();
display.clearDisplay();
display.drawBitmap(0, 8, PHYduino_Logo, 128, 64, WHITE);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.setTextSize(1);
display.print("orangeV TCJHS.lab T&C");
display.display();
delay(1500);
display.clearDisplay();
}
void loop() {
display.setTextColor(WHITE);
display.setCursor(0,0);
display.setTextSize(1);
switch(0) {
case 0:
// 第一列印出 Excel 標題列
if(line_count == 0) {
Serial.println("MLX_temperature,IR_temperature,DHT_temperature,DHT_humidity");
Serial.println("MLX*C,IR *C,DHT*C,DHT %");
}
else {
Serial.print(mlx.readAmbientTempC());
Serial.print(",");
Serial.print(mlx.readObjectTempC());
Serial.print(",");
Serial.print(dht.readTemperature());
Serial.print(",");
Serial.println(dht.readHumidity());
}
line_count ++;
break;
}
DHTxx();
delay(1000);
}
void DHTxx() {
sensors.requestTemperatures();
float DHThum = dht.readHumidity();
float DHTtemp = dht.readTemperature();
float cc = sensors.getTempCByIndex(0);
float cc1 = sensors.getTempCByIndex(1);
float DHT2hum = dht2.readHumidity();
float DHT2temp = dht2.readTemperature();
display.println("orangeV TCJHS.lab T&C"); display.print("IR_T = "); display.setTextSize(2); display.print(mlx.readObjectTempC()); display.setTextSize(1); display.print("\t"); display.setCursor(102, 16); display.println("C"); display.print("DHT_T= "); display.print(DHTtemp,1); //小數點1位 display.setTextSize(1); display.print("\t"); display.print("C "); display.print(DHThum,1); //小數點1位 display.println("%");
display.display();
display.clearDisplay();
}
--------------程式在上方的分隔線---------------
參考資料
一、筆記(78):利用Python讀取序列埠溫濕度值儲存到csv檔
https://atceiling.blogspot.com/2019/12/arduino78pythoncsv.html
二、紅外線溫度計 使用紅外線溫度感測器[MLX90614 / GY-906]
https://sites.google.com/mail3.hwsh.tc.edu.tw/earth/arduinoadvanced/ir-temperature-sensor-mlx90614
之前曾經產出一個很棒的學習單-基礎測量-吐司吐司2014
不過今年覺得這個學習單應該改良一下,將建立模型-粒子說這個觀點放進去,會讓整個課程更漂亮完整,也可以作為未來在所有物理(化學)跟粒子說有關的基模
而且後段那個阿基米德浮力部分,應該移到下一個實作學習的評量比較恰當,所以修正成以下這個版本基礎測量-吐司吐司2021
依據的課綱內容剛好符合以下事情
學習內容 | 學習內容說明 |
Ea-Ⅳ-1 時間、長度、質量等為基本物理量,經由計算可得到密度、體積等衍伸物理量。 以適當的尺度量測或推估物理量,例如:奈米到光年、毫克到公噸、毫升到立方公尺等。 測量時可依工具的最小刻度進行估計。 | 1-1 例如測量長度可以進而計算面積與體積,測量重量可以得知質量,將質量除以體積可以得到描述物質特性的物理量-密度。 2-1 認識不同的尺度,從原子分子、奈米尺度到生物的細胞、日常生活的物體到地球、星系、宇宙的尺度,知道量測的意義。 3-1 了解測量會有誤差;能說明減少誤差的方法以及知道估計值的意義。 |
如果一本課本第一冊第一章就有很多不符核課綱的內容,然後他也審過了,你覺得整個過程合理嗎?
以下是我們用課本關鍵字去對照課綱交叉處理搜索得到的結果
分析課本核心關鍵字(科學方法探究部分另外分析)
生物、非生物、代謝、生長、發育、感應、運動、適應、生物圈、細胞學說、顯微鏡、細胞核、細胞質、細胞膜、粒線體、葉綠體、液泡
符合國小課綱關鍵字
適應(課本提到的適應概念應於國小內容呈現,或於生態系章節呈現即可)
顯微鏡、細胞
符合國中課綱關鍵字
非生物、代謝、生長、感應、生物圈、細胞、顯微鏡
更適合出現在其他地方的關鍵字:代謝、生長、感應、適應
符合高中課綱關鍵字(超綱部分)
生命現象、發育、細胞學說、液泡
該寫卻沒寫的
適應(課本沒提到5-1動植物體藉由特化的構造適應環境,其構造常成為人類發展各種儀器的參考,例如:參考魚類、鳥類的流線形體形來製造飛機或船的外形。)
因為整理課綱的時候發現了很多問題,所以會持續書寫這個系列,希望課本可以慢慢改變,也能影響會考方向,不要在超綱了,最好能影響課本書寫與編排,不要在超綱了!
會開啟這個系列是因為最近在做一些很單純的備課動作
1.分析各單元的會考題,以終為始調整教學
2.用關鍵字查詢各單元章節課綱內學習內容內含,了解小中高到底要教什麼,以承先啟後
3.分析課本關鍵字
4.對照123差異,了解自己授課核心要放在哪裡
然後發現一些滿令人詫異的真相,就想說來開新戰場好了,希望寫完不要有人按電鈴...
自從大考心測中心釋出新課綱模擬試題時,月鈴老師就有發現這個問題:大考中心新課綱模擬試題沿用舊課綱,沒有依據新課綱修改,文章如下:
讓老師安心的為新課綱的理想而努力吧https://bell5-platform.blogspot.com/2019/08/blog-post.html
這個部分有問題的層次有幾個
1.我們寫課綱、負責大考出題、寫課本、審課本、選課本的單位跟想法都不一樣,總共5個層次,跨越中央、書商、學校老師三個不同階段
2.中央主管單位應該是寫課綱、負責大考出題、審課本這三個單位,但是這三個單位不全依據課綱去執行,造成教師的不信任感,所以課綱怎麼改,大家還是沒看,因為一點都不重要,反正中央部門自己都不看
3.小中高三個階段改成新課綱沒有串聯銜接,目前小三自然才"剛使用"新課綱,但是國中新課綱已經使用3年了,同理,108開學時的高一就是新課綱,但他們是接受完整舊課綱的一批,要等111入學的學生才是完整新課綱的學生。雖然有所謂的轉銜教材...但...
光是參照某個國中課本遺漏的課綱學習內容與學習內容說明就有以下這麼多